Sewing ideas

DECORATIVE FAIRY LIGHTS

Rate this project

To vote, simply click on a star.

 

The project

No rating

The sewing instructions

No rating

  

Materials:

  • Two 30cm x 30cm sheets of template paper
  • Four 25cm-wide strips of lightweight fabric (netting, crepe de chine, taffeta or tulle)
  • Staples
  • Elastic bands or ribbons
  • One ordinary string of fairly lights (readily available from supermarkets and large chain stores)

Instructions:

  • Using the template paper, cut out 20 or more rectangles measuring 5cm x 15cm (the number of rectangles should correspond to the number of fairy lights on the string).
  • Roll up each of the paper rectangles to make a small cylinder, and staple into place, overlapping the edges by at least 1cm to ensure each cylinder is firmly fixed.
  • Taking the lightweight fabric, carefully tear or cut (depending on fabric type) a quantity of 25 x 25cm squares corresponding to the number of lights on the string.
  • Place each cylinder vertically in the center of a fabric square, and bring the four corners of the square together so that the fabric surrounds the cylinder.

 

  • Holding each cylinder from underneath, position it over a fairy light.
  • Pull the fabric tightly over the cylinder to cover the bulb, as if you were wrapping a tiny parcel. The fabric should hold the cylinder in place.
  • Bring the four corners of the fabric together over the cylinder and attach firmly using an elastic band or ribbon.
  • Repeat until you have covered all the fairly lights along the entire length of the string.